Skip to main content

Addition (WORD)

Instruction Parameters

Supported PLC Series

XPnA/1RXPnBXPnEXPnFCP3A/B/P/U
CP4A~D/U
CPnECPnFBPPLC-S

Supported Data Registers

MXYKLFTCSZRQD@DConstant
S1-
S2-
D----

Supported Flags

FlagBitSupport
ErrorF11.0
ZeroF11.1-
CarryF11.2-

Number of Steps

Steps
4

Operands

OperandDescription
S1The first operand.
Entries are WORD data registers or constants.

The signed value range is -32,768 ~ 32,767 (216).
The unsigned value range is 0 ~ 65,535 (216-1).
The Hexadecimal value range is H0000 ~ HFFFF.
S2The second operand.
Entries are WORD data registers or constants.

The signed value range is -32,768 ~ 32,767 (216).
The unsigned value range is 0 ~ 65,535 (216-1).
The Hexadecimal value range is H0000 ~ HFFFF.
DThe third operand.
Entries are only WORD data registers.
This is where the sum is saved.

Notice

Error Flag (F11.0) Notice

The error flag, F11.0, will be ON for one scan when the address of the data register assigned by @D exceeds the range of the data register, D. The range of the data register, D, is dependent on the CPU type.

F11.0 turns ON when the value of the data for adding exceeds the data register assigned to S1 or S2.

Tip: Signed Notation

The signed value range for ADD and ADDP is -32,768 ~ 32,767 (216).

  • If the ADD or ADDP instruction is executed while the value for the sum data register, D, is 32,767, the overflow value for the sum data register, D, will begin at -32,768.
  • If the ADD or ADDP instruction is executed while the value for the sum data register, D, is -32,768, the overflow value for the sum data register, D, will begin at 32,767 if the number being added is -1.

Examples