Insert Table Data
Instruction Parameters
Supported PLC Series
| XPnA/1R | XPnB | XPnE | XPnF | CP3A/B/P/U CP4A~D/U | CPnE | CPnF | BP | PLC-S |
|---|---|---|---|---|---|---|---|---|
| ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Supported Data Registers
| M | X | Y | K | L | F | T | C | S | Z | R | Q | D | @D | Constant | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DEV | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| TBL | - | - | - | - | - | - | - | - | - | ✓ | ✓ | ✓ | ✓ | ✓ | - |
| n | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | ✓ | ✓ | ✓ | ✓ | - | ✓ |
Supported Flags
| Flag | Bit | Support |
|---|---|---|
| Error | F11.0 | ✓ |
| Zero | F11.1 | - |
| Carry | F11.2 | - |
Number of Steps
| Steps |
|---|
| 4 |
Operands
| Operand | Description |
|---|---|
| DEV | The first operand. Entries are WORD data registers or constants. This is the value to insert into the table. The signed value range is -32,768 ~ 32,767 (216). The unsigned value range is 0 ~ 65,535 (216-1). The Hexadecimal value range is H0000 ~ HFFFF. |
| TBL | The second operand. Entries are only WORD data registers. This is the starting address for the table. |
| n | The third operand. Entries are WORD data registers or constants. This is the index to insert DEV into. The value range is 1 ≤ n ≤ TBL data amount. |
Notice
Error Flag (F11.0) Notice
The error flag, F11.0, will be ON for one scan when the address of the data register assigned by @D exceeds the range of the data register, D. The range of the data register, D, is dependent on the CPU type.
F11.0 turns ON when the data table exceeds the range of the corresponding data register.
F11.0 turns ON when the value of the data for n isn't in the range 1 ≤ n ≤ TBL data amount
Instruction Behavior
The FINS and FINSP instructions behave as follows:
- The value, DEV, is inserted at the index, n, in the table, TBL.
- n must be greater or equal to 1 and less than or equal to the integer value representing the amount of data saved in the table, TBL.
- The overall amount of data saved in the table, TBL, will increase by 1.
- The first value of TBL is an integer number representing the amount of data saved in the table, TBL.