Skip to main content

Greater Than or Equal To (DWORD)

Comparison Uses

There are three types of comparison uses:

  • LDD (Ladder Diagram)
  • ANDD
  • ORD

The following compare instructions can be used as a:

  • DWORD standalone execution condition (LDD)
  • DWORD and execution condition (ANDD)
  • DWORD or execution condition (ORD)

Instruction Parameters​

Supported PLC Series​

XPnA/1RXPnBXPnEXPnFCP3A/B/P/U
CP4A~D/U
CPnECPnFBPPLC-S
✓✓✓✓✓✓✓✓✓

Supported Data Registers​

MXYKLFTCSZRQD@DConstant
S1✓✓✓✓✓✓✓✓-✓✓✓✓✓✓
S2✓✓✓✓✓✓✓✓-✓✓✓✓✓✓

Supported Flags​

FlagBitSupport
ErrorF11.0✓
ZeroF11.1-
CarryF11.2-

Number of Steps​

Steps
3

Operands​

OperandDescription
S1The first operand.
Entries are signed DWORD data registers or constants.

The signed value range is -2,147,483,648 ~ 2,147,483,647 (232).
The Hexadecimal value range is H00000000 ~ HFFFFFFFF.

Only DWORD values will be compared.
Only signed or Hexadecimal values will be compared.
S2The second operand.
Entries are signed DWORD data registers or constants.

The signed value range is -2,147,483,648 ~ 2,147,483,647 (232).
The Hexadecimal value range is H00000000 ~ HFFFFFFFF.

Only DWORD values will be compared.
Only signed or Hexadecimal values will be compared.

Notice​

Error Flag (F11.0) Notice

The error flag, F11.0, will be ON for one scan when the address of the data register assigned by @D exceeds the range of the data register, D. The range of the data register, D, is dependent on the CPU type.

Signed Overflow

DWORD data register entry behaves as follows:

  • If the value of S1 or S2 exceeds the smallest signed value -2,147,483,648, the value will be set to -2,147,483,648 with no warning.
  • If the value of S1 or S2 exceeds the largest signed value 2,147,483,647, the value will be set to 2,147,483,647 with no warning.

Examples​