Set Carry Flag (1)

Instruction Parameters

Supported PLC Series

XPnA/1R	XPnB	XPnE	XPnF	CP3A/B/P/U CP4A~D/U	CPnE	CPnF	BP	PLC-S
✓	✓	✓	✓	✓	✓	✓	✓	✓

Supported Data Registers

M	X	Y	K	L	F	T	C	S	Z	R	Q	D	@D	Constant
-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Supported Flags

Flag	Bit	Support
Error	F11.0	-
Zero	F11.1	-
Carry	F11.2	✓

Number of Steps

Steps
1

Notice

Instruction Behavior

The STC instruction behaves as follows:

• The STC instruction sets the carry flag, F11.2, to ON (1), when the operation condition is ON (1).
• When the operation condition of the STC instruction is OFF (0) or ON (1), there is no change in the carry flag, F11.2.

Operational Differences

There are operational differences with the carry flag, F11.2, between the CPU types BP, XPnA/1R, CP3A/B/P/U, CP4A~D/U, and the CPU types PLC-S, XPnB/E/F, CPnE/F.
Refer to the carry flag, F11.2, for more information.

Examples

• Ladder Diagram