Skip to main content

Ladder Diagram Example

LD Gate Example​


The LDP rising edge (one-shot) contact orientation creates an execution condition based on the ON status of the assigned BOOL data register, S, for only 1 scan.

Ladder Diagram Example​


When the rising edge (one-shot) contact, M24.5, is powered OFF, the coil, Y3.3, is deenergized.



When the rising edge (one-shot) contact, M24.5, is powered ON, the coil, Y3.3, is energized for only 1 scan.



The rising edge (one-shot) contact, M24.5, will remain ON (unless otherwise specified), but the coil, Y3.3, is deenergized after 1 scan.

Scan Execution Time

Since scan programs execute in less than a second, it might not appear that the coil, Y3.3, was energized.