CICON Keyboard Shortcuts
Ladder Diagram Editor
| Shortcut | Action |
|---|---|
| F2 | Inserts a horizontal line. |
| F4 | Inserts a inverted horizontal line. |
| F5 | Inserts a normally open contact (contact A). |
| F6 | Inserts a normally closed contact (contact B). |
| F7 | Inserts a positive transition-sensing contact (pulse up). |
| F8 | Inserts a negative transition-sensing contact (pulse down). |
| F9 | Inserts a coil. |
| F10 | Inserts an application instruction. |
| F12 | Inserts a comment. |
| Shift + F2 | Inserts a vertical line. |
| CTRL + F2 | Deletes a vertical line. |
| Shift + F9 | Inserts a function block. |
| CTRL + G | Runs the AI Assit feature. |
| CTRL + L | Inserts a new rung above. |
| CTRL + R | Deletes the current rung. |
| CTRL + Enter | Inserts a new rung in between. |
| CTRL + Home | Highlights the first space of a first rung. |
| CTRL + Left Arrow | Inserts a horizontal line left. |
| CTRL + Right Arrow | Inserts a horizontal line right. |
| Delete | Deletes an item or rung. |
| Space | Pushes one column to the right. |
| SHIFT + ENTER | Energizes or deenergizes a contact. |
| CTRL + I | Energizes or deenergizes a forced I/O contact. |
| ESC | Restores the mouse cursor to a pointer. |
Edit Menu
| Shortcut | Action |
|---|---|
| F3 | Finds the next item. |
| Shift + F3 | Finds the previous item. |
| CTRL + F | Finds the specified content. |
| CTRL + Shift + F | Finds all specified content. |
| CTRL + G | Goes to the specified step number. |
| CTRL + N | Creates a new file. |
| CTRL + O | Opens an existing file. |
| CTRL + P | Prints the current file. |
| CTRL + S | Saves the project. |
| CTRL + Z | Undoes an action. |
| CTRL + SHIFT + Z | Redoes an action. |
| CTRL + C | Copies an item and saves it to the clipboard. |
| CTRL + V | Pastes last saved item from the clipboard. |
| CTRL + X | Cuts an item and saves it to the clipboard. |
Sequential Function Chart Editor
| Shortcut | Action |
|---|---|
| CTRL + 0 | Inserts a STEP. |
| CTRL + 1 | Inserts a keep STEP. |
| CTRL + 2 | Inserts a coil keep STEP. |
| CTRL + 3 | Inserts a reset STEP. |
| CTRL + 4 | Inserts a dummy STEP. |
| CTRL + 5 | Initializes a STEP. |
| CTRL + 6 | Finishes a STEP. |
| CTRL + 7 | Inserts a block. |
| CTRL + 8 | Inserts a jump start point. |
| CTRL + 9 | Inserts a jump arrival point. |
| ALT + 0 | Inserts a transition condition. |
| ALT + 1 | Inserts a transition no condition. |
| ALT + 2 | Inserts a transition selective branch condition. |
| ALT + 3 | Inserts a transition selective branch no condition. |
| ALT + 4 | Inserts a transition selective coupling condition. |
| ALT + 5 | Inserts a transition selective coupling no condition. |
| ALT + 6 | Inserts a transition parallel branch condition. |
| ALT + 7 | Inserts a transition parallel branch no condition. |
| ALT + 8 | Inserts a transition parallel coupling condition. |
| ALT + 9 | Inserts a transition parallel coupling no condition. |
Structured Text Editor
| Shortcut | Action |
|---|---|
| F5 | Runs the Structured Text debugger. |
| SHIFT + F5 | Stops the Structured Text debugger. |
| F6 | Runs the Structured Text debugger to the next line. |
| F7 | Runs the Structured Text debugger to the next point. |
| F9 | Adds or removes a break point. |
| F12 | Deletes all break points. |