📄️ Digital Conversion Value
Digital Conversion Values are used to retrieve output values from temperature modules. There are two types of Function Blocks designed for this purpose, depending on the number of values to be retrieved.
📄️ Digital Output Value
It is used to write an output value to an expansion module. There are two types of Function Blocks designed for this purpose, depending on the number of values to be retrieved.
📄️ Error Codes
It is used to get an error code from the RTD, Thermocouple, or Thermistor module.
📄️ ETC
It is used to write a value to an expansion module.
📄️ FB Instruction
It is used to get an error code from the RTD, Thermocouple, or Thermistor module.
📄️ High-Speed Counter
It is used to get a value from the high-speed counter.
📄️ Positioning (CM1)
It is used to control positioning of servo-drives or stepper motors.
📄️ Positioning (CM3)
It is used to control positioning of servo-drives or stepper motors.
📄️ Temperature-Detected Value
It is used to get value a from the temperature module. There are two types of Function Blocks designed for this purpose, depending on the number of values to be retrieved.