CM3 Ethernet Communication Module Internal I/O Table
CM3-SP02ERS & CM3-SP02ERR Internal I/O Table
| CM3-SP02ERS & CM3-SP02ERR Internal I/O Table | |||
|---|---|---|---|
| Direction of Signal CPU → CM3-SP02ERS or CM3-SP02ERR | Direction of Signal CM3-SP02ERS or CM3-SP02ERR → CPU | ||
| Input | Name of Signal | Output | Name of Signal |
| Xn.0 | Module Error | Yn.0 | Requesting to Clear Error |
| Xn.1 | Finishing Initialization | Yn.1 | Reserved |
| Xn.2 | Modem Error | Yn.2 | |
| Xn.3 | Channel 1 Ring Receive | Yn.3 | |
| Xn.4 | Channel 1 Check Received Data | Yn.4 | Channel 1 Received Buffer Clear |
| Xn.5 | Channel 1 Transmission Buffer Empty | Yn.5 | Channel 1 Transmission Buffer Clear |
| Xn.6 | Channel 2 Check Received Data | Yn.6 | Channel 2 Received Buffer Clear |
| Xn.7 | Channel 2 Transmission Buffer Empty | Yn.7 | Channel 2 Transmission Buffer Clear |
| Xn.8 | Connecting Packet Communication | Yn.8 | Requesting to Connect Packet Communication |
| Xn.9 | Finishing Packet Communication Connection | Yn.9 | Reserved |
| Xn.A | Finishing Modem Initialization | Yn.A | Requesting Modem Initialization |
| Xn.B | Dialing | Yn.B | Requesting Dialing Line Connection |
| Xn.C | Status of Line Connection (DCD) | Yn.C | Requesting Disconnect Line |
| Xn.D | Detect DSR | Yn.D | Ring Answer |
| Xn.E | Reserved | Yn.E | Reserved |
| Xn.F | Finishing Parameter Apply | Yn.F | Requesting Parameter Setup |
Allocation Example
CM3-SP02ERS
The CM3-SP02ERS is allocated one WORD of X (Xn.0 ~ Xn.F) and one WORD of Y (Yn.0 ~ Yn.F).
n is a number representing the CM3-SP02ERS's position within the chassis.
To access the X memory registers for this CM3-SP02ERS example, the X value range is X2.0 ~ X2.F.
To access the Y memory registers for this CM3-SP02ERS example, the Y value range is Y2.0 ~ Y2.F.
CM3-SP02ERR
The CM3-SP02ERR is allocated one WORD of X (Xn.0 ~ Xn.F) and one WORD of Y (Yn.0 ~ Yn.F).
n is a number representing the CM3-SP02ERR's position within the chassis.
To access the X memory registers for this CM3-SP02ERR example, the X value range is X2.0 ~ X2.F.
To access the Y memory registers for this CM3-SP02ERR example, the Y value range is Y2.0 ~ Y2.F.