CM3 RTD Module Specifications

CM3 RTD Module General Specifications

CM3 RTD Module General Specifications
Specification	Description			Standards
Operating Temperature	-10°C ~ 65°C 14°F ~ 149°F
Storage Temperature	-25°C ~ 80°C -13°F ~ 176°F
Operating Humidity	5% ~ 95% RH, Non-condensing
Storage Humidity	5% ~ 95% RH, Non-condensing
Vibration	Intermittent Vibration Frequency Acceleration Amplitude Times 5Hz ≤ f < 9Hz - 3.5mm 10 times in X, Y, and Z 9Hz ≤ f ≤ 150Hz 9.8m/s2 (1G) - Continuous Vibration Frequency Acceleration Amplitude Times 5Hz ≤ f < 9Hz - 1.75mm 10 times in X, Y, and Z 9Hz ≤ f ≤ 150Hz 4.9m/s2 (0.5G) -			IEC 61131-2
Shocks	Maximum Shock Acceleration: 147m/s2 (15G) Time: 11ms Pulse Wave: Sine Half-Wave (3 times in X, Y, Z)			IEC 61131-2
Noise	Square Wave Impulse Noise	±2kV		CIMON Standard
	Electrostatic Discharge	Voltage: 4kV (contact) 8kV (air)		IEC 61131-2 IEC 61000-4-2
	Radiated Electromagnetic Field	80MHz ~ 1,000MHz 10V/m		IEC 61131-2 IEC61000-4-3
	Fast Transient Burst Noise (Voltage)	CPU Power	2kV	IEC 61131-2 IEC 61000-4-4
		Digital/Analog I/O (AC)
		Digital/Analog I/O (DC)	1kV
		Communication
Environment	No corrosive gas No dust
Altitude	2,000m or less
Pollution	Pollution Degree 2 or less
Cooling	Natural air cooling

CM3 RTD Module Performance Specifications

CM3 RTD Module Performance Specifications
Specification		CM3-SP04ERO
Weight		87g
Dimensions		20mm x 63mm x 90mm 0.787in x 2.480in x 3.543in
Temperature Input Points		4 Channels/1 Module
Insulation Method		Photocoupler Insulation between input terminal and PLC No insulation between channels
Connection Terminal		12-point terminal block
Current Consumption (mA)	+3.3V	40
	+24V	10

CM3 RTD Module Performance Specifications

CM3 RTD Module Performance Specifications
Specifications		CM3-SP04ERO
RTD Type		PT100 JPT100 PT1000 Ni1000 (DIN43760) Ni1000 (TCR5000)
Range of Temperature Input		PT100: -200°C ~ 600°C (-328°F ~ 1,112°F) (18.52Ω ~ 313.71Ω) JPT100: -200°C ~ 600°C (-328°F ~ 1,112°F) (17.14Ω ~ 317.31Ω) PT1000: -200°C ~ 600°C (-328°F ~ 1,112°F) (185.2Ω ~ 3,137.1Ω) Ni1000 (DIN43760): -50°C ~ 160°C (-58°F ~ 320°F) (742.6Ω ~ 2,065.9Ω) Ni1000 (TCR5000): -50°C ~ 160°C (-58°F ~ 320°F) (790.9Ω ~ 1,863.6Ω)
Digital Conversion		Digital Converted Value (14-bit): -192 ~ 16,191 (-8,192 ~ 8,192 or 0 ~ 16,000 or -8,000 ~ 8,000) Digital Converted Value (16-bit): 0 ~ 65,000 (-32,768 ~ 32,767 or 0 ~ 64,000 or -32,000 ~ 32,000) Detected Temperature Value: -2,000 ~ 6,000 or -500 ~ 1,600 (First decimal place value × 10)
Wire Disconnection Detection		3 wires available from each channel
Accuracy		±0.1% (Full scale)
Maximum Conversion Rate		40ms/4 Channels